Replacing a Front Bumper (Honda Civic 1999)!

One of my doggies went feral and ate part of my car's front bumper. After 2 years I decided it's time for a new look. Here is how I replaced the front bumper.

My car has two 10mm bolts holding up the bumper front the bottom of the subframe. Also below are 4 screws that need to come out. On the top side there are some plastic plugs that I tore off since they refused to come out willingly.

Here is the old one off. I needed to do some more salvage work before I put it into storage.

The grill is held by 6 screws and the license plate nuts came off easily after cutting the plastic studs off.

Ah here it is. For 960ttd this will be my new Bumper.

I used my birdbeak pliers to press the nuts on the plastic studs. After I put on the grill.

Installing was the reverse of removal. Now my car has brand new bump and it took me an hour to do this. I hope my dogs don't snack on it this time!