Repurposed Plate Planter

This is the perfect project for every plant lover, as well as for that person who wants to commemorate his first hotrod.  This project is almost sure to give you a conversation starter, while at the same time creating an attractive centerpiece.

The materials include:  
   Tinsnips    
   Hot Glue Gun  
   Pliers
   License Plate
   Ruler      
   Creativity    
   Pen                                                                                                                                                                       

First of all, draw two horizontal lines. One of the lines should be drawn 1 1/4 in. from the top of the license plate, and the other should be drawn the same distance from the bottom.  Next, you should vertically align the ruler with the edge of each letter(and symbol).  Now, you should draw a line (along the edge of the ruler), as shown in one of the pictures above.  There should be no lines in between the first two horizontal lines you drew.  Next, snip along each of the vertical lines, as shown in the pictures.

Fold as shown above and crimp the top folds with the pliers.  Next, roll the folded license plate into a cylinder, and, using hot glue, seal off, from the inside, where the two edges meet. 

Materials:
  Razor
  Frosting Container

All you need to do is turn the container upside down and make two small drainage slits in the bottom.  Now place your plant in your planter, and, if it is to be used indoors, set it on a dish to catch any drainage.  Thanks for reading.  Enjoy your planter!  (By the way, if it happens that you aren't a plant person, you can use this project as a cup holder instead.) 


If I were to win the Epilog Challenge, my brothers and I would use the Zing Laser Cutter to create intricate puzzle boxes, silhouette art, and custom gifts.  For us, the laser cutter would open a door of endless creative possibilities.