Rescue a Bluetooth From Laptop

second usage to Bluetooth module from a laptop designated to the bind.....

a Bluetooth module from a old laptop(normally is in the up right or up center of the screen of the laptop,when you open the front part of the screen laptop)....

a USB cable with male part

necessary to soldering and some heat-shrink tubing

the module Bluetooth have a little connector(normally is withe).....cut this connector and preparing all wires

to soldering.....!!

you have 4 or five wires: use only red,black,withe and green....other...zack......

connect with a USB cable,with same colors( in all cables USB you have 4 colors:red,black,withe and green and

the usages is:black=ground;red=positive 5 volt;withe and green is for data).....

cover all connections with appropriate isolation.....

you have a possibility to place this component in a appropriate enclosure....free choice ....

on windows seven,at the moment of you connect in USB,windows search automatically all drivers to permit the usage on your PC.....

use Bluetooth to transfer data,music or other from/to PC and all other compatibles machines......

have fun and thank's to watch my instructable.....