Restore Old Furniture Without Power Tools.

by joreknight in Workshop > Furniture

17311 Views, 65 Favorites, 0 Comments

Restore Old Furniture Without Power Tools.

DSC00001.JPG
DSC00055.JPG
This is my first Instructable, so cut me some slack.

This is a very old chair but it has a lot of sentimental value in my family, it used to belong to my grandpa, so as a special mothers day gift I restored it for my mom.

I'm not a pro at this every thing i know about wood working i learned from my uncle Nachi (RIP) so this instructable is dedicated to his memory.

I used very basic tools and techniques but if you have some free time you can get pretty good results out of them.

So just give yourself time and if you get bored give it a rest and start when ever youre ready again so you don't mess up.

Find a Place to Work

DSC00002.JPG
It's allways best if you have a place to work where you can leave every thing if you get tired, plus if you make a mess who cares it's your shop any ways.

so this is my little shop of horrors

The Tools

DSC00004.JPG
DSC00003.JPG
this are very basic tools, just some hammers, a flat head screw, some pliers and then on the second pic we have sand papers, a dust mask, wood filler, shellack, and thats about all i used to restore this old chair.

Out With the Old

DSC00007.JPG
DSC00008.JPG
DSC00009.JPG
DSC00013.JPG
DSC00005.JPG
the first thing i did was to remove the old and dried up leather.

for this i used mostly the screwdriver as a pry bar, i also used the claw hammer ad the pliers to remove the old nails and tacks holding the leather down, this is pretty straight forward just remove anything thats not made of wood.

It's Time for Muscle Power

DSC00010.JPG
so this is when we start sanding the wood i started out using a 120 grit and that's the only grit i used for this step.

i'll tell you why in the next step.

Filler Up.

DSC00017.JPG
DSC00018.JPG
DSC00019.JPG
DSC00024.JPG
DSC00025.JPG
remember i only sanded the wood with 120 grit, that was because we need to use the wood filler to even up all the nicks in the chair.

this is a messy step but who cares just have fun, and remember use a lot of filler you will sand it down later any ways.

Sand Some More.

DSC00031.JPG
DSC00034.JPG
DSC00028.JPG
DSC00020.JPG
DSC00042.JPG
this is the step where you break a sweat and the most time consuming also, start with the 120 grit so most of the filler evens up with the wood, thn work your way up to the other grits.

French Polish

DSC00044.JPG
DSC00047.JPG
DSC00050.JPG
DSC00051.JPG
DSC00052.JPG
DSC00053.JPG
since i wanted this chair to be as original s possible i french polished it, this also takes some time but it's not as hard as you think

to french polish you use shellac dilluted in alcohol and some cotton in a rag this thing is called a mu�equilla, to do this you first wet the mu�equilla with the shellac and start with long strokes, then you make some round ones and figure eight ones, and then some more long strokes, used a ketchup bottle to hold the shellac and wet the mu�equilla from time to time.

Go to the Local Tanners.

i don'y have pics of this step, but go to your local tanners and buy some leather to upholster the chair again, get creative in this step, leather's expensive ( i spent about 60 USD) so you can experiment with other fabrics. also dont forget to buy tacks and nails to hold te leather down.

i first nailed the leather and then used the tacks to cover up the nails.

You Are Done!

DSC00054.JPG
DSC00055.JPG
so this is what my chair looks like when i finished it, the leather looks a little orange but it will get darker with use so it will get brown in time, anyways since youre done give your self a pat in the back and make your mom proud.

good luck, have fun and take your time i spent about to weeks on the project but it was worth it because of th sentimental value.