Retro TV LEGO

by benderbrasil in Living > LEGO & K'NEX

7230 Views, 61 Favorites, 0 Comments

Retro TV LEGO

this instructable will show you how to make a gorgeous retro TV LEGO

Parts

2 plate 1x4 red
6 brick 1x4
2 mini antenna
3 flat tile 1x4
2 flat tile 1x1
2 plate 1x6
1 plate 2x6
1 plate 4x6
8 plate 1x4 black
8 plate 1x1 round
8 brick w. arch 1x1x1 1/3

Step 1

make four groups of parts plate 1x1 round as in the picture

Step 2

enter the part plate 4x6 leaving the sets formed in each corner of the piece as in the picture

Step 3

place the two pieces Plate 1x6 together as in the picture

Step 4

put the part plate 2x6 between the two previous as in the image

Step 5

Now enter the part brick 1x4 as a on the image

Step 6

Now enter the part brick 1x4 as a on the image

Step 7

Now enter the part brick 1x4 as a on the image

Step 8

repeat last three steps until it equals the image

Step 9

combine the pieces plate 1x4 red as the image

Step 10

place the group formed in the previous step in the construction of the project as pictured

Step 11

pull all the pieces plate 1x4 black as pictured

Step 12

place the group formed in the previous step in the construction of the project as pictured

Step 13

enter the part brick w. arch 1x1x1 1/3 as in the photo

Step 14

go supplementing with these pieces to look like the picture

Step 15

add the part plate 2x4 as the image

Step 16

put part flat tile 1x4 set as in the image

Step 17

put the pieces flat tile 1x1 in set as in the image

Step 18

put part flat tile 1x4 set as in the image

Step 19

put part flat tile 1x4 set as in the image

Step 20

place the part mini antenna as pictured

Step 21

repeat the step and finished project
ps: excuse the possible spelling errors as I am from another country and use another language

next instructable: sofa