3D Printed Casing for Bluetooth Amplifier TDA7492P

I've earned an old amplifier with speakers that a friend was throwing away and since the amplifier was not working, I decided to recycle the speakers with an wireless bluetooth set.

there is a variety of audio amp boards you can get.

i got this one but you can pick an appropriated one for your project.

http://www.banggood.com/TDA7492P-50W50W-Wireless-B...

http://www.ebay.com/itm/TDA7492P-50W-50W-Wireless-...

in my next build i'll try this one for 3W speakers:

http://www.banggood.com/2x3W-Mini-Digital-Power-Am...

it's up to you or the needs of your project. just check some reviews first, the one i got didn't had an AUX line in...

check your amp board schematics for the power supply info.

in my case its 8-25V DC. and i have a box full of old ones.

always check the Voltage to see if it's working well

Measure the PCB and design 3D file in the CAD software of your choice.

ex.: solid works, fusion 360, sketch up, rhino, blender, etc....

if you use the same board as I did, feel free to download and print my design.

http://www.thingiverse.com/thing:1602238

if you don't have a 3D Printer you can always use https://www.3dhubs.com