Rings and Chain Fidget

This Instructables you will learn how to make a fidget tool. This tool will help people that have a hard time sitting still.

What you will need

1. Bike chain
2. Two key Rings
3. Chain breaking tool
4. 2 to 4 Rainbow loom rubber band. (Personal prefers if and how many to use.)

Using the chain break. Break bike chain into two, one outer link and one inner link.

Break the chain so you have 4 outers or inners that are the same. Outers/inners make the Fidget behave differently.

Take two of your outers/inners and put them on the outside of your link piece. Run the Keyring through the eye hole of all 3 link pieces(the 2 outers/inners and one link pieces)

Take the chain break and remove the pin. Back the chain break out slowly or the bushing will fall out. Rubber band links together then run keyring through eye hole.

Link all rings together. Overlap the rings by feeding one ring over the other and your done