Gravity Falls Robbie Valentino Cosplay Hoodie

by djmunsettled in Craft > Costumes & Cosplay

1857 Views, 3 Favorites, 0 Comments

Gravity Falls Robbie Valentino Cosplay Hoodie

cropped.bmp

Here is a Robbie Valentino Cosplay Hoodie I created.

Supplies

Black hoodie

Plastic folder folders

Masking tape

Red ink

Permanent magic marker

Gravity Falls

tumblr_n4vcgbfpKh1s8k7qko1_1280.jpg
Robbie.png
OIP.jpg

For several years I was on a big Gravity Falls kick. The show is very well written and extremely entertaining. I started out several years ago doing a team cosplay at work. I dressed as Dipper Pines and built a large journal prop and my manager dressed as Mabel Pines and I made her one of Mabel's unique sweaters and a grappling hook gun.

Last year I hosted a Summerween event at the library where I worked. I created a Grunkle Stan cosplay.

In between these two event I created a Robbie Valentino cosplay that I deputed at Ohayocon and then pulled out again for Halloween.

Hoodie Image Design

20180116_184211.jpg

The most distinctive part of Robbie's look is a hoodie with the image of a scarred bleeding heart.

I did my internet research and cleaned up an images from a screen grab.

I then blew it up and printed it on a piece of 8.5" x 11" paper.

Folder for Stencil

20180116_184232.jpg
20180116_184258.jpg
20180116_184424.jpg
20180116_184639.jpg

I was going to be making a stencil for the design. Instead of buying stencil plastic from a craft store I just went to a drug store and bought a plastic folder for under a dollar.

I disassembled it and had an 8.5" x 11" sheet of plastic to use.

Stencil Creation - Part One

20180116_184712.jpg
20180116_184906.jpg

I then just used a glue stick to glue the design onto the plastic.

Stencil Creation - Part Two

20180116_184932.jpg
20180116_185016.jpg
20180116_185027.jpg
20180116_185353.jpg
20180116_190603.jpg

I then cut out the stencil. I cut a chunk out with a knife and then trimmed the rest with scissors.

I decided against meticulously cutting out the dripping heart section and made it just one large piece. I would draw in the details.

Ink Application

Unfortunately I do not have any photos of this process.

I taped the stencil onto the hoodie with masking tape.

I then took a sponge and dabbed red silkscreen ink that I had bought at a craft store onto the stencil.

I have used this technique before but had always just used acrylic paint. I decided to use actual ink this time hoping it would be smoother. The acrylic paint always dried super stiff.

The ink dried just as stiff.

Oh well.

I used a black Sharpie to draw in the separation of the drips and the scar on the heart.

.

Final Hoodie

20180216_123713.jpg
OIP.jpg

I found a hat and a shirt for a co-worker to dress up as Wendy and and I had another duo Gravity Falls cosplay.