Robotic Arm With Tynkercad

This is an instructable for making a robotic arm in tinkercad

Computer

Tinkercad Acount

Mouse (Highly recomended)

Get a cylindere and make it: 5.64mm height, 31.00mm long and 34.00mm width.

Now get another cylinder that it is 82.00 Height and 13.00 width.

Go to the shape display and chose connectors after get the angaled ball and put it on top of the cylinder then retur to the basic shapes and in the space of the angalled ball put a little cylinder that the width is of 4.00 and the height it's of 3.00

now put another cylinder on top of the little one, width:11.00 Height:36.70.

Get triangular roof and put it on the cylinder the height, it's of 23.45 and 19.45 width.

Now draw with the scrible something like the photo. and then do copy and paste 3 times after put them on the roof.

Now we have left the battery its very easy to do.

The way to do the cable is to draw a S in the scrible and then atach one end to the cube we have previously created and the other to the base. like the photo.

Thats all