Rubber Band Bracelet

What you need...
Rubber bands for making the bracelets (you can get at a craft store)
C clips or paper clips I'm using c clips

Start by getting 1 rubber band

Pinch it together

Get another rubber band ....
Pinch it the same way

Place one rubber band in front of the other one


One sideways and the other going up and down (the one going up and down is the one in the back) (the rubber band in the front is sideways)

The one going up and down you ate going to use first,

Hold the rubber bands in one hand still one sideways and the other going up and down, the one going up and down you are going to grab the bottom and pull it over the top part of threat same rubber band. Pull it tight

Get another rubber band push it through the loops of the beginning rubber bands

Slightly pinch the rubber band push another rubber band through do this several times (small wrists 19) (larger writs 20-23)

To do the finishing rubber band you have to put it through like you have been doing the past several times but this time push one end of the rubber band though the other end like shown in the photo

.....then pull tight

This photo should look like what yours is supposed to look like

But now, get your "C clip"

Stretch the ending rubber band and attach the "C clip"

Do the same with the other end

FINISHED PRODUCT!