STEAM PUNK STUN GUN / 223 ZOMBIE ELIMINATOR.
by w.bartlett in Craft > Costumes & Cosplay
2847 Views, 35 Favorites, 0 Comments
STEAM PUNK STUN GUN / 223 ZOMBIE ELIMINATOR.
THIS WAS A BROKEN SMITH & WESSON SHOT GUN I PICKED UP AT THE GOOD WILL.
BASICALLY REMOVED THE BARREL AND TOOK THE COMPLETE THING APART, TOOK OUT EVERYTHING EXCEPT THE TRIGGER AND THE END OF THE STOCK WHERE I WOULD ATTACH MY OWN BARREL.
TOOK AN OLD MULTI METER BOX AND SHAVED IT DOWN TO FIT IN THE MAGAZINE SLOT.
PAINTED THE WHOLE THING COPPER AND THE MAIN BODY BLACK AND DRILLED OUT THE SMALL INDENTS ON EACH SIDE TO FIT .223 CALIBER CASINGS. DRILLED A FEW HOLES TO ADD MY KILL METER LOL.
PUT IT ALL BACK TOGETHER STUCK IN THE CASINGS AND SCREWED THE COUNTER ON AND ADDED A OLD CANDLE SNUFFER TO THE FRONT UNDER THE BARREL. AFTER IT WAS ALL DONE THEN I WET SANDED IT WITH 600 GRIT TO GET THE LOOK I WANTED.
ENJOY.
BASICALLY REMOVED THE BARREL AND TOOK THE COMPLETE THING APART, TOOK OUT EVERYTHING EXCEPT THE TRIGGER AND THE END OF THE STOCK WHERE I WOULD ATTACH MY OWN BARREL.
TOOK AN OLD MULTI METER BOX AND SHAVED IT DOWN TO FIT IN THE MAGAZINE SLOT.
PAINTED THE WHOLE THING COPPER AND THE MAIN BODY BLACK AND DRILLED OUT THE SMALL INDENTS ON EACH SIDE TO FIT .223 CALIBER CASINGS. DRILLED A FEW HOLES TO ADD MY KILL METER LOL.
PUT IT ALL BACK TOGETHER STUCK IN THE CASINGS AND SCREWED THE COUNTER ON AND ADDED A OLD CANDLE SNUFFER TO THE FRONT UNDER THE BARREL. AFTER IT WAS ALL DONE THEN I WET SANDED IT WITH 600 GRIT TO GET THE LOOK I WANTED.
ENJOY.