SURGICAL FACE MASK PRESSURE POINT REDUCER

This 3D printable creation is for a Surgical Face Mask Pressure Point Reducer. The reducer helps relieve discomfort from face mask ear loops that occurs with extended periods of wearing. It also helps with maintaining a tight mask seal around the noise, mouth, and chin by keeping the face mask in the appropriate position on the face. Tighter face mask seal means better protection from environmental hazards. The reducer was designed around appropriate processes of donning and doffing face masks when utilized under isolation precaution in a health care setting.

3D PRINTING SETTINGS Printing time and quality may very between 3D printer machines. Approximate time for printing one (1) Face Mask Pressure Point Reducer is 2.5 hours using PLA filament. See screen shot for specific printing settings. 3D file format: STL

3D file format: STL 3D model size: X 24 × Y 130 × Z 60 mm

3D Printer

PLA Filament