Safety Goggles for Knex Guns

In this instructable you can learn how to make a pair of plastic goggles out of a 2lt soft drnks bottle. You can make a version with or without string.
Without string is better cause the string gets annoying.


P.s This is my first instructable.
I dont like unwanted comments.


I will NOT be held responsible for any injury or death while wearing these goggles, they have not yet met official saftey standards.(PLEASE TAKE CARE, WEAPONS AND GUNS ARE DANGEROUS!)

Items that you will need: A 2lt soft drinks bottle,
Scissors,
Insulation tape(stiky tape)
String

see picture for my reccomendations.

Cut the top and bottm off your bottle and cut a 22cm strip from around the middle. Make it about 2 inchs wide so it will cover all of your eyes.

Use the pictures to help you.
After throw away the top and bottom of your bottle.

Try not to get coke everywhere!

For this you will need any tape, cut a small dint where you want your nose to go and then sart to cover the edges with tape. Once all the edges are coverd it will feel smooth on your face. Using your scissors make a hole in each corner if you want to add string.

Use the pictures to help you.