Saving Fire Damaged Furniture

by wells1784 in Workshop > Furniture

7426 Views, 30 Favorites, 0 Comments

Saving Fire Damaged Furniture

1485710159146.jpg
IMG_20170128_151442.jpg
IMG_20170128_135654.jpg
IMG_20170128_122734.jpg
IMG_20170128_131819.jpg

A neighbor recently had a house fire. Sadly they lost a lot of their possessions before it was put out by the local fire department. Some of their furniture survived the fire but many of them were severely smoke damaged. Most of these items were antiques that belonged to her grandmother. I seen her putting them out for the trash to pickup. So I walked over and asked could I try to save them for her.

The Smoke Damaged Furniture

IMG_20170128_115936.jpg
IMG_20170128_140213.jpg
IMG_20170128_115942.jpg
IMG_20170128_122734.jpg
IMG_20170128_115925.jpg
IMG_20170128_115917.jpg
IMG_20170128_133035.jpg

You will need to inspect the damage before you begin to make sure they can be saved. Luckily these did not have any actual fire damage it was just smoke damage. She has a table, dresser, and buffet that I worked on. As you can see the table was in the worse shape. When I made this Instructable I was still in process of working on it.

Items You Will Need

IMG_20170128_120240.jpg

You will need the following items:

FURNITURE REFINISHER (Miwax or Formby's work the best)

FEED-N-WAX

QUART CUP

00 / 0000 STEEL WOOL

CLEAN RAG

NITRILE GLOVES

HEAT GUN (for removing melted plastic of candles)

DRILL GUN W/ WIRE BRUSH (Optional)

ORBITAL SANDER

PASTE WAX

FACE MASKS

WD40 (for rusted metal)

Getting Started

IMG_20170128_120610.jpg
IMG_20170128_120628.jpg
IMG_20170128_120645.jpg

FIRST Put on your gloves, face mask and protective eye wear)

Then pour the furniture refinished in a quart cup. I filled it about 1/2 full.

Next, place the steel wool in the cup and let sit for a few minutes.

A Lot of Elbow Grease

IMG_20170128_120724.jpg
IMG_20170128_120740.jpg
IMG_20170128_124154.jpg
IMG_20170128_124129.jpg

Remove the steel wool from the cup and begin rubbing the furniture with the grain ( this helps keep the finish nice). You wont have to rub hard, just rub back and forth. You will notice a black residue coming up. Take your rag and wipe this up and keep rubbing the smoke stain out. Sometimes this can take several passes. Rub the entire piece of furniture. Let air dry for 15 minutes. Inspect and repeat if needed.

In Progess

IMG_20170128_122305.jpg
IMG_20170128_121238.jpg
IMG_20170128_134125.jpg

Here you can see how after several passes the smoke stains start to come loose from the wood.

Wax

IMG_20170128_122530.jpg
IMG_20170128_122550.jpg
IMG_20170128_122540.jpg

After you have cleaned the smoke stains away. Its time to wax the furniture. I put 2 coats on of feed and wax. Just apply in small circles over entire piece.

Finished

IMG_20170128_152745.jpg
IMG_20170128_151449.jpg
IMG_20170128_131825.jpg

After apply the feed and wax I let the pieces sit out in the Sun for a while to dry. Mind you that this took about 5 hours to do. Its not hard just take a lot of patience and elbow grease. I didn't many pictures since my hands had chemicals and such on them.

BEFORE AND AFTER

IMG_20170128_140230.jpg
IMG_20170128_140236.jpg
IMG_20170128_151452.jpg
IMG_20170128_164141.jpg

As you can see the contrast is very dramatic. She was thrilled to get these pieces back.

Still in Progress

IMG_20170128_115926.jpg
IMG_20170128_161101.jpg

I'm still working on her table since it had the most damage. As you can tell with on of the leaf's up that some times you can save trash and turn it back into a treasure.