Scrap-box Cybernetic Hand Gun(no Gun Yet)

These are the things that will need to do this epic machine

List Of Items

cardboard box ( to fit your hand in )
2 loo rolls
duct tape
normal tape
blue or/and purple paper
shiny tape ( small )
marker pen
card in any colour
scissors

First, you need to make the telescope part on the side.
Get your 2 loo rolls out and cut them at both side in a straight line ( only half way) . insert the loo rolls into each other so that they form a double loo roll (In the picture). Use your card to make a large square and cut out a hole where you think your roll needs to go. attach the roll onto the card on the hole and duct tapeiffy the box until you reach the part of where the bend is going to be.

Okay, I might not have explained it all well. I mean in the last step.

Now To The Box
Take the box from your bank/from the side and cut of the overhanging parts from the opening of the box.

Attaching
Take your upgraded box, your telescope & duct tape from the side. Place the telescope on one side of the box and attach it on using the duct tape.

WARNING : Attaching the telescope and the box is quite hard.

this part is really up to you to decide what you want it to look like. Here's how I did it.

Decoration
get your duct tape and tape quarter's of the box at the end's then roll the colour paper around the box and tape the end's. Now add a small strip of duct tape and wrap the edges with silver tape and add details with marker pen.

Now your machine should look like in the pictures. As I said it is up to you how you decorate.

Thanks for reading and I hope that you have a great day! :-)