Scuba Diver Action Figure

How to make a scuba diver toy.

Tools: an electronic device, wifi, and tinkercad

first you should get the square object and shape it to the size you like.

for step 2 you need to get 2 cylinders and put them next to each other. Make sure to line them up.

for step 3 you will need 6 small squares and put them on the oxygen tanks. 3 squares on each tank and Amy colors you want for the squares.

for step for you need to get the snorkel mask and get 2 eyes. You need to make the eyes fit the mask pretty well in you want it to look nice.

this is the finished product for the mask and the eyes.

for step 6 you should make 2 legs on your square. You should get 2 squares and shape them to look like rectangles. Those rectangles are your legs. Now you get 2 flippers and put them on your legs.

now put your mask and eyes where your face should be. You can be creative for your face.

for step 8 it is time to create some arms. Get 4 squares and shape them to create arms. They should look like one in the photo above.

for step 9 get 2 tubes and put them on the tanks. After you should start to make an outline for your belt like you see above.

for step 10 make the belt go all around the Stomach and connect to the other side of the belt and should be finished.

this is the finished product