Shift Key Usb Drive (Custom Case)
by Ayush Sharma in Circuits > USB
2287 Views, 44 Favorites, 0 Comments
Shift Key Usb Drive (Custom Case)
My Old Usb Drive's Case was broken today so i thought to make a new custom case and there was also a Old Keyboard lying in my house's store room.
So,to make use of that and build a Shift Key Usb Drive.
So,to make use of that and build a Shift Key Usb Drive.
Getting the Things
We Will need a :-
1. Old Keyboard
2. Usb Drive with no Case
3. Epoxy (Mixing Type)
4. Flat-Head Skrewdriver
5. Plier ( forgot to mention in pic)
1. Old Keyboard
2. Usb Drive with no Case
3. Epoxy (Mixing Type)
4. Flat-Head Skrewdriver
5. Plier ( forgot to mention in pic)
Pull the Key Out of Keyboard
Fit the skrewdriver and pull out the key from keyboard.Be Careful not damage the key.
Pull Out the Wire and Cleaning the Inside
Pull the wire from key.
Now, break that round thing with plier and other plastic which is inside.
Now, break that round thing with plier and other plastic which is inside.
Mixing the Epoxy
Mix the Epoxy till it is fully black.
Just apply it as fastest as possible.
Otherwise if you go slow , it will get hard and it will be wasted and if you half-way appling epoxy to usb and key then it is worse.
Just apply it as fastest as possible.
Otherwise if you go slow , it will get hard and it will be wasted and if you half-way appling epoxy to usb and key then it is worse.
Put the Epoxy
First Put the Epoxy Acording the height you want your usb drive to be. Then Epoxy the remaning part.
It was a Hard time having a Flat surface at the end.
It was a Hard time having a Flat surface at the end.
Final Product
A Shiny and Good Looking Usb Drive.
Now Impress Your Friends Also By Making Custom Cases ;)
Now Impress Your Friends Also By Making Custom Cases ;)