Shoebox Foosball Table!

by aserebryakov12 in Craft > Art

13994 Views, 40 Favorites, 0 Comments

Shoebox Foosball Table!

IMG_3590.JPG

A fun and easy craft for kids 6 to ll years old!

Materials

IMG_3479.JPG

Needed supplies:

Glue (any kind with work)

10 Clothespins

A Shoebox (or a small box 4 ½ inches tall, 8 inches wide, and 13 inches long)

4 wooden Dowels

A Ping Pong Ball

A Sharpie or Pen

A Knife A Ruler

Optional Materials

IMG_3500.JPG

Alternatives:

Super glue- glue gun or regular school glue

X-acto knife- box cutter

Scissors

Tape on the skewers: Buttons, Tac, Clay

Start Making It

We decorated the outside of the box. (Sorry we don't have any pictures but you can use colorful duct tape or paper to decorate the box, it's your choice).

Make Measurements

IMG_3488.JPG

We decided on where we wanted the skewers placed and how to arrange the clothespins. We used four skewers, placed 2 inches in from the corner of the box, and 2 ½ inches apart. With 5 inches between the middle two skewers. We did this by first placing them on the top to test the spacing and then measuring out the inches on the side. Then we used the ball to measure how far up to place them. We went with 3 inches from the bottom of the box.

Place the Kickers

IMG_3490.JPG

Skewers were places 1 ½ inches down from the top of the box.

Make Sure That the Kickers Can Reach the Ball

IMG_3497.JPG

Make Goal Measurments

IMG_3508.JPG
IMG_3503.JPG
IMG_3509.JPG
IMG_3514.JPG

After that we outlined where the goals would be. We measured 1 inch in from the corners and 2 ½ up from the bottom.

Cutting Out the Goal

IMG_3557.JPG
IMG_3565.JPG
IMG_3563.JPG
IMG_3562.JPG

After making the marks for the goal cut out the goal.

Putting in the Kickers

IMG_3534.JPG
IMG_3522.JPG
IMG_3519.JPG
IMG_3555.JPG
IMG_3553.JPG
IMG_3552.JPG
IMG_3550.JPG
IMG_3541.JPG
IMG_3536.JPG
IMG_3532.JPG
IMG_3531.JPG

After marking all of the measurements, we started to cut everything out. We cut the skewer holes first. We marked on the side and then stuck them through and pressed the sharp end into the other side of the box to mark where the opposite holes would be.

Put It Together and Add the Kickers

IMG_3569.JPG
IMG_3574.JPG

After cutting the holes for the sticks and the goals out, we added the skewers and taped the ends with the colors of the teams and to cover the sharp end. In our optional supplies we included buttons, these can also be used on the end of the skewers.We added the clothespins. Two closest to the goal and three on the inside.

Add the Kickers

IMG_3574.JPG

We added the clothespins. Two closest to the goal and three on the inside.

Final Product

IMG_3575.JPG
IMG_3585.JPG

Have Fun!