Shooting Gun Rest

my Fellow Instructables. Why Go and buy a New Gun Rest? $300 $500 Dollars?

I Decided To Make One. total Cost $40 Dollars

Im Using Metal Tubing 2/3.4 inches by 1 And 28 inches Long.

i Used a 28 inch long Rectangle pc of metal tubing for the body. On one end i welded a 4 inch pc Going up.

This is the Back support and i also welded two triangle Pcs For extra strength

On the bottom of the back support i pt a 1 inch long nut and a long Bolt to adjust the Back Up and Down

The Front has another Pc 5 inches Tall and two one inch long Nuts to hold the screw that makes the top move

Up And Down.

i welded a small triangle on the bottom of the front Pc For extra support.

And a 4 inch long plate that supports the Front of the gun.

But after making it it moved way to much so i changed the design

Found a door hinge and this worked perfect No more movement.

by moving the screw the plate moves Up And Down notice the stained wood that will hold the Foam.

This foam came from a foam mat.

using my band saw cut the Pcs for the front and back supports

last step Some Matt green Paint

and she is Done.

Rectangular Metal Tubing 40 inches long by 2 3/4 and 1 inch

3mm thick metal for the Legs and top base.

3 1 " long Nuts and Two 5 " Bolts

Foam.

Ribbets, Ribbet Gun,

Rubber,

Grinder,Bech grinder,

Band Saw

Safety Gear. glasses,Boots , Gloves,Ear muffs

Welding Machine.

Paint Respirator,

Now Go And Make Something.

Made a Cardboard template and then Cut the Legs out of metal. Two of them.

we;red the legs to the Body and place a bottom base on the legs