Mini Character Key Chain Craft

by eric dirgahayu in Craft > Knitting & Crochet

468 Views, 5 Favorites, 0 Comments

Mini Character Key Chain Craft

sdsdsdsd.JPG
DSC00022.JPG
DSC00035.JPG
DSC00024.JPG
DSC00025.JPG
DSC00031.JPG
DSC00032.JPG

Hello, this is mini tutorial how to make crafts from yarn that is very easy and simple. We will make something of the mini character or another objects, the results can be used for a key chain or the other. Here are the steps to make it :

Material and Making a Frame

DSC09981.JPG
DSC09983.JPG
DSC09985.JPG
DSC09986.JPG
DSC09987.JPG
DSC09989.JPG
DSC09988.JPG
DSC09990.JPG
DSC09991.JPG
DSC09992.JPG
DSC09994.JPG
DSC09993.JPG
DSC09995.JPG
DSC09996.JPG

the material you need :

-Yarn with different colors

-pliers

-scissors

-iron wire

-needle

First step :

cut into approximately 30 cm of wire, and then fold it in half. in the folds of the piercing rod with small screw driver to form a circle. then twirled a little wire rods (pic no.2-4).

make a bending moment on each stem into two parts so that the wire lane. (pic no.5) then the second strip wire at twirled and constructed by the bottom circumference of juka at Strip up to form a cross. (pic.8) and at the bottom for 2 wire line to form the legs, the same as the previous wrap wire to unite.and the rest of the wire that has not yet been able to scroll by twirled around the middle to form the body.

now the frame is finish and we get into step 2 to give the skin.

DSC09997.JPG
DSC09999.JPG
DSC00002.JPG
DSC00003.JPG
DSC00004.JPG
DSC00005.JPG
DSC00006.JPG
DSC00007.JPG
DSC00008.JPG
DSC00009.JPG
DSC00010.JPG
DSC00011.JPG
DSC00012.JPG
DSC00013.JPG
DSC00014.JPG
DSC00015.JPG
DSC00016.JPG
DSC00017.JPG
DSC00018.JPG
DSC00019.JPG
DSC00020.JPG
DSC00021.JPG
DSC00028.JPG

I will not be much to write down a long steps because here we just roll up the yarn on the frame we have created above, starting from the head you can use skin color.

First we start with the head rolls of yarn color of the skin around the frame head, but leave the other end of the wire in the shape of a round on the very top of the frames that were later used to hang.

After the head covered with a skein of yarn yarn, continue rolling up on the body and arms with another color, select a color as you want.After the body section is completed go to part away with rolled yarn with other colors so that better.

this section you may need needle, yarn roll on the end of the frame, and at the end of the frame arms and legs there is a circle of wire, thread here should be rolled play into the wire circle so that later the yarn not easy to off. at the foot of the buckling slightly so that the form of the foot. okay if all is done means we're done make it now we just put up a rope or chain is small so we can hang him in a place that we want to.

thankyou ^,^ sorry for my bad english...