Simple Laptop Stand

Needed a cheap and effective laptop stand that would work for both of my laptops. Used as little material and tools as possible.

Materials:

• 100x45x45 mm piece of wood
• 2x rubber feet
• 2x steel wood screw

Tools:

• saw
• clamps
• wood glue
• screwdriver
• sandpaper

Measure and cut to desired size. I cut the piece of wood diagonally to get two triangle shapes; you can see the marked lines in the picture.

Glue the side legs together. Make sure to let it dry properly before sanding it down.

Rubber feet are put on the top to provide more friction and keep the laptop in place.

As a footnote, there is enough room to install a fan if you should desire more cooling for your laptop.