Simple Soldering Wand Stand

989 Views, 25 Favorites, 0 Comments

Materials

1. Block or wood
2. Big thick non insulated wire
3. Drill same size as wire
4. Soldering wand/pen/iron
2. Two big screws

For the base I just used a simple little piece of wood nothing special.

To get the wire spirals I used a ward rake handle and wind it around it. Making one side wider and taller than the other.

This where we use the two screws you need to place then about two inches apart and then you can wrap the cord around them.

Now your soldering wand holder is complete.

Also if you would like to se me make some thing please tell me.