Simple Off-road Lego Car

by tdwarnke in Living > LEGO & K'NEX

18837 Views, 28 Favorites, 0 Comments

Simple Off-road Lego Car

Lego 1.JPG
Learn how to make this simple off-road looking Lego car in just 8 easy to follow steps.

Step 1

Lego 8.JPG
Get the 10x4 flat gray Lego board and the two 4x1 black axles with the tires attached to them. 

Step 2

Lego 7.JPG
With the the two axles with the tires on them, attach each axle to the very ends of the 10x4 gray Lego board.

Step 3

Lego 6.JPG
Find the two clear wedge like Lego pieces and attach them to one side of the gray board. Position the wedge like pieces so that the sloped side is facing away from the rest of the gray Lego board. 

Step 4

Lego 5.JPG
Get a red 4x2 Lego block and position it directly behind the two clear wedge like Lego pieces. 

Step 5

Lego 4.JPG
Find the two red 1x1 Lego pieces and put them directly behind the red 4x2 block so that they are on the very edges of the gray board. Find the two red 6x1 pieces and put them directly behind the two red 1x1 blocks. Find a red 4x2 red block and put it in between the two red 6x1 blocks.

Step 6

Lego 3.JPG
Find the clear windshield, steering wheel, and the Lego person. Put the windshield around the opening of the hole in the red blocks. Put the steering wheel directly behind the windshield inside the opening of the red blocks. Now put the Lego person in the available space behind the steering wheel.   

Step 7

Lego 2.JPG
Find and position the yellow roll bar directly behind the Lego driver. 

Step 8

Lego 1.JPG
Find a 4x2 red block, two red wedge like pieces, and a 4x1 red block. Put the 4x2 red block directly behind the yellow roll bar. Put the two red wedge like pieces on top of the red 4x2 block so that the wedges are facing away from the yellow roll bar. Now finally place the red 4x1 block directly behind the red 4x2 block.