Sledgefire Slug With Not Much Modding
by tinyhooman in Outside > Launchers
1128 Views, 2 Favorites, 0 Comments
Sledgefire Slug With Not Much Modding
Hello, And welcome back to another nerf mod. Today I will show you how to basically take out the ARs in a sledgefire shell.(Disclaimer: DO NOT DO THIS TO ALL YOUR SHELLS)
AR Removal
Use needlenose pliers to pry apart the bonds between the AR and shell. Repeat this with all 3 ARs.
Loading It
Back load one elite dart into the bottom slot of your shell. Make sure that this dart is on the bottom of the shell while in the blaster.
Tips
Do not do this to all your shells(It may be tempting, but don't do it.)
Put your other 2 unmodded shells in the stock, so you can take darts out of them to breechload it
Do not put the darts in the stock all the way in, so you can load easier
Put your other 2 unmodded shells in the stock, so you can take darts out of them to breechload it
Do not put the darts in the stock all the way in, so you can load easier
Done!
You have completed the slug mod for the nerf sledgefire. Now go snipe some things(it gets 70-80 fps for me)