Small Cent Plaque/Variety Cents (450)

by timothy.wilkerson in Craft > Art

352 Views, 2 Favorites, 0 Comments

Small Cent Plaque/Variety Cents (450)

56cf6e1167400cd7bf000449.jpeg

It took me originally 1 full week to design, and create this wonderful penny Small Cent / Variety Cent Plaque (450) count. It will make the small cent collectors happy you thought of them, and their desires to conquer them all. Mine would retail for $1,000 if I were to sell it due to work hours put in it. I could make them for someone if interested. Try doing it yourself first. Then come back.

Selecting the Wood, and the Metal Trim:

The 23.88" inch square, by .20" thick Birch plywood or Oak, you can get at LOWE'S. $6.87

The 1/4" inch "C" channel, aluminum alloy trim you can get from LOWE'S: $3.50 about that for an 8 foot piece.

Getting the Coin Bits & Depth Guide / Forstner Bits From "EAGLE Co.";

Item number:

Use a Straight Edge Corner to Corner to Bisect and Find Dead Center;

Marking Holes, All (450) of Them;

Hand Drilling Coin Holes for Pennies; and Marking Bottom Right Border Designer Initials;

After Drilling Holes, Fill Open Gaps With Wood Glue, and Let Dry;

After Drying, Redrill With Coin Sized Forstner Bit Wih Depth Guide Still Attached;

Cutting Trim With HEAVY-DUTY Side Cutters, Again From LOWE'S;

Apply Your Signature Inside the Frame of the Workpiece, Then Glue the Trim on From the Back;

Hanger, Mounted to a Stand Alone Framed Diarama Box, or Lean Against Wall; Finished.