Smart Dustbin

This project is all about how you can make a smart dustbin at home just using minumum of 5 or 6 things.

Have you ever wondered you can make a smart dustbin for your home. Just take a look at this project. In this project I use Arduino Uno, Ultrasonic sensor, jumper wires, servo motor, thread, a small steel washer and a dustbin.

Take Arduino uno, Ultrasonic sensor, servo motor, Jumper wires, 9v battery and dustbin box.

Connect servo motor yellow pin(signal pin) to Arduino digital pin no. 9

Connect servo +Vcc pin to Arduino +5V pin.

Connect servo GND pin to Arduino GND pin.

Take Ultrasonic sensor connect sensor TRIG pin to Arduino pin no. 2.

Connect sensor ECHO pin to Arduino pin no. 3.

Connect sensor +Vcc pin to Arduino +5V pin.

Connect sensor GND pin to Arduino GND pin.

Connect servo at the top of Dustbin with the help of glue gun.

Connect washer and thread to the dustbin box.

stick servo on the top of the dustbin half fold end cap.

paste washer with the help of glue gun inside the half fold cap.

Make 2 holes infront of dustbin box and fit ultrasonic sensor inside it.

Stick all the components inside the dustbin box and sealed it with tape after uploading the code.

Connect battery or power source to Arduino.

Help me achieving my dream of 1000 subscribers on YouTube.

Below is the link of my channel.

https://www.youtube.com/channel/UCaXI2PcsTlH5g0et6...

Subscribe my channel for sure....

Thanks...