Sniping for Nerf

by Djmcool in Outside > Launchers

1630 Views, 4 Favorites, 0 Comments

Sniping for Nerf

14, 9:27 PM.jpg
So if you didn't like my first one,you can use this for better sniping for Nerf wars.
You will need:
.Nerf gun(s)
.Old binoculars(you don't need them anymore)
.Glue or tape
.Marker or paint
.Screwdriver

Getting Started

14, 9:27 PM.jpg
14, 9:27 PM.jpg
So you take the screw and take apart your binoculars and mine have a part so I can use a small scope.You need one big lens and one little lens.

Glue the Lens

14, 9:27 PM.jpg
Ok so since you have one of each lens and then you want to glue them back together.

Patience Is Important

14, 9:27 PM.jpg
14, 9:27 PM.jpg
So you might want to wait for the glue to dry before you get it.Once it drys,take the paint or marker then draw or paint a plus with a circle.If your a pro,then you might want to put degrees.Then wait for that to dry

The Hard Part

14, 9:27 PM.jpg
So you take your thing to some one really skilled at drawing or you can do it.After that you need tape to tape it.

Your Done!

14, 9:27 PM.jpg
So when it dries up you tape it to the top of your gun and you finished!