Soda Bottle Trumpet
My class was having a christmas concert and we had to make our own instrument. So, I decided to make a Soda bottle trumpet. I hope you have fun!
Materials:
You’ll need:
1 soda bottle
Duct tape (optional)
Drill
PVC pipe (7 4/10’’)
3D printed trumpet mouthpiece
Step 1:
You will need a big soda bottle.
Step 2:
You will need to drill three holes on the side, and five small holes and one big hole at the bottom.
Step 3:
You may design your bottle with any kind of designing materials if you’d like. It is totally optional.
Step 4:
You want to cut out the bottom of a plastic container at attach it to the bottle.
Almost There!
You have only one more step! Put a PVC pipe into the hole on the top. Then put your mouthpiece on that!
Finished!
You have completed your soda bottle trumpet!