Solar Powered Phone Charger Dose Not Work See My Other One

by makerman04 in Circuits > Electronics

623 Views, 4 Favorites, 0 Comments

Solar Powered Phone Charger Dose Not Work See My Other One

IMG_3468.JPG

have you ever been in the middle of nowhere with no power and your phone dies? well, I have a solution for you...

Tools/materals

2017-08-16 14.41.19.jpg

tools

-soldering iron

-hack saw

-side cutter/ wire cutter( not pictured)

materials

-solder

-wire

-USB charging block

-solar panel (5v+)

Open the Charging Block

2017-08-16 15.01.14.jpg

Use the hack saw to cut open the USB charging block(be careful not to cut the circuit board)

Cut the Plug Leads

Use the side cutters to clip the leads off the plugs

Get Wire

IMG_3461.JPG

Solder the Leads

solder the wires on the USB leads to the correct colored wires (use heat shrink tubing to keep it all together.)

Wire It All Up

IMG_3466.JPG

Connect the wires to the solar panel and head outside to test

Finished

IMG_3470.JPG

You are all set with your new solar powered phone charger. Take it on a picnic or a hike and charge your phone anywhere