Space Ship (TinkerCAD)

In this inscrutable we are going to make a space ship in Tinker CAD

this is fairly easy to make.

first, grab a box and expand it then make it a thin slab the fir the shape of the wing.

now take a torus in the basic shapes, and expand it and flip it 90 degrees on it's side like the picture and connect it to the very edge of the slab and copy it and do the same to the other side.

now take 2 spheres and put them in one of the holes in the torus's leaving one side open.

now group them together

now take a cylinder and make it look something like the pictures above.

make sure that you make it look a little flat while you expand it, you do not need to change any of the other variables.

now take your wing part and copy it

now place it on the upper half of you body

it should look a little bit like an x-wing from Star Wars

now just adjust your grid to fit the size of the ship

to adjust it click the button by the snap grid option in the bottom right corner

now take a box and size it to look like the picture above and then make the radius 7.36.

now connect them as shown

now take a cylinder hole shape and place it on both the left and right sides of the red area of the ship as shown.

now take a cone and proceed to the next step

now you can adjust the tip to a look of your choice to fit you ship or you could make it look like mine by making it have 12.16 sides and making it a little short or make it longer.

nice job.

you have completed the project

please like and follow me for more TinkerCAD projects to make.

have a good day