Spike Ring

This ring creates the illusion of a spike going through your finger, although the ring is SO lightweight you probably won't even feel it. **This project DOESN'T use actual spikes, they're just simply cone bead caps! Much easier to find than real spikes.

Supplies:

- Jewelry pliers
- Super//E6000 glue
- Adjustable ring blank
- 2 cone bead caps

If your ring blank has a loop on it, twist it off with the pliers. Separate the two ends of the ring to widen up it up a bit.

Bend each of the ends out, making them as flat as you can.

Glue one of the prongs into the inner top part of a bead cap.

Repeat on the other side. Let dry.