Spool Tool Organizer

Working with Electronics you then to pile up empty soldering wire spools, it's a shame throwing a nice piece of plastic away, so why not make a simple cool project out of it to keep your tools organize on your workbench.

On this project i show you how to make a spool tool organizer.

Watch the video and see how to make step by step this project.

You will need for this project:

- A empty spool ( I used a spool from a soldering wire but can use from something else )

Get your spool an drill holes around the edge, i made eight holes on the top and bottom with a 5 mm drill bit.

You can change the diameter of the holes depending of what tools you are considering to put there, the holes on the bottom its intended to hold the tool up right.

When you are finish you can hot glue the soopl to your working table to avoid knocking down.

This is a simple project to reuse empty spools and keep at the same time your work place nice and tidy.

Tell me on the comments below what applications you will use this for.

Please subscribe to my YouTube channel

https://www.youtube.com/channel/UCL-jpfIywlIeSoJ-v...

And follow me on Instructables

https://www.instructables.com/member/Engineer+of+No...

Thanks for reading
You're still here, go and make this project!