Spool Holder

by soccerkid1 in Living > Organizing

1544 Views, 5 Favorites, 0 Comments

Spool Holder

13, 10:04 AM.jpg
This spool holder is easy to make and is very helpful with hold spools

Step 1

 design a sketch

Step 2

create design on solidworks and download on to flash drive

Downloads

Alex Clip.STL

Step 3

13, 10:13 AM.jpg
print the design in the 3D printer

Step 4

13, 10:14 AM.jpg
Once clamp is printed, sand down if needed

Step 5

13, 10:15 AM.jpg
sand down the pvc pipe that goes into the hole of the clamp

Step 6

13, 10:17 AM.jpg
on the non sanded end of the 5.5 inch pvc pipe put the T shaped connector

Step 7

13, 10:18 AM.jpg
insert both 2 inch pvc pipe into each end of the T shaped connector.

Step 8

13, 10:19 AM.jpg
Put wooden dowel through T shaped pvc pipe.

Stepm9

13, 10:20 AM.jpg
put the two end caps on the wooden dowel