Stacking Toys

by owen.sawyer in Craft > Digital Graphics

151 Views, 0 Favorites, 0 Comments

Stacking Toys

Screen Shot 2021-05-19 at 11.14.49 AM.png

-Go to tinkercad.com

-Create an account

-Create new design with button on top right

Supplies

-Tinkercad

Building the Base

Screen Shot 2021-05-20 at 8.32.47 AM.png

-Place a cylinder on the work plane

-Scale to a height of 3mm and a diameter of 50mm

-Place another cylinder in the center of the last one and scale to a diameter of 10mm and a height of 76mm

First RIng

Screen Shot 2021-05-20 at 8.33.05 AM.png

-Place a taurus on the work plane and scale it to a diameter 25mm and a height of 5mm

Second Ring

Screen Shot 2021-05-20 at 8.33.18 AM.png

-Place another taurus and scale it to a diameter of 32mm and a height of 7 mm

Third Ring

Screen Shot 2021-05-20 at 8.33.30 AM.png

-Place another taurus and scale it to a diameter of 38mm and a height of 8mm

Fourth Ring

Screen Shot 2021-05-20 at 8.33.42 AM.png

-Place another taurus and scale it to a diameter of 50mm and a height of 12mm