Stand Alone Pet Feeder for 20 Liters of Pellets / Nuggets

by RumpelS in Living > Pets

2299 Views, 21 Favorites, 0 Comments

Stand Alone Pet Feeder for 20 Liters of Pellets / Nuggets

IMG_6998.jpg

What I need is a pet feeder

  • which has a big volume for pellets / nuggets and feeds my cats even during a long vacation of 2 months.
  • which is really robust and reliable, so I can be sure that my cats don't die during my vacation.
  • which keeps functioning after a power failure.
  • which does not require a 3D printer (makerbot).

A Chinese Pet Feeder Which Is NOT Reliable

Img_5000.jpg
Img_5001.jpg

I have this pet feeder from China but it is not worth the money:

  • It works only on battery which is a stupid design.
  • The batteries cannot be replaced with a DC power supply because the microprocessor will forget any programmed hours after a power failure.
  • The mechanics are very cheap. A tiny motor moving small plastic gears which are placed in a an unintelligent location where they get clogged by the pellet poweder and I saw them getting stuck!
  • It has a mechanical sensor (detecting the position of the ejection wheel) which also gets dirty by pellet poweder and then the feeding motor never stops throwing pellets!
  • The volume of the pellet container is too small. Maximum 3 weeks of feeding 2 cats.
  • The programming of the feeding hours is so extremely clumsy that you will never be able to do it if you ever lose the (horrible chinese) manual.
  • This device is just cheap crap.
  • Simply do not buy it!

Also here on Instructables are several pet feeders but none meets my criteria.

Using a Modified Meat Grinder

IMG_6880.jpg
IMG_6881.jpg
IMG_6883.jpg

So I constructed my own machine based on a meat grinder (approx US $38).

Modify the Helix

IMG_6886.jpg

The helix has a pivot of steel and a helix of aluminum. The last turn must be removed with an angle grinder.

Modify the Plate

IMG_6888.jpg

Then prepare the meat outlet grid like this. This is an extremely hard steel which you must cut with an angle grinder.

Modify the Attachment

IMG_6889.jpg
IMG_6891.jpg

The attachment does not have a smooth surface. To avoid that pellets get destroyed I inserted a smooth metal sheet.

Mounting Together

IMG_6896.jpg
Img_6898.jpg

All mounted together.
(My cat is so curious)

Take Out the Guts of the Machine

IMG_6901.jpg

Here you see the motor which runs very fast and the gear box (black) which makes the helix turn much slower.

Don't worry about the switches. (One for turning on/off and one for foreward/backward rotation) I let them connect as they are.

The Wooden Box

IMG_6910.jpg
IMG_6911.jpg
IMG_6905.jpg

To mount the box I use plywood, 15 mm thick.
My box is 30 cm x 40 cm x 1,20 m.
Obviously you can chose another size if you like.
You need 3 wooden "floors" and a lid.

The Electronics

IMG_6919.png
IMG_6920.jpg
IMG_6922.jpg

The electronics is very simple. I use an Arduino Nano which is very cheap.
The Nano allows to be fed with 5V over the USB cable or over an external power supply of 8V to 25V or both at the same time.

Mounting the Circuit

IMG_6927.jpg
IMG_6928.JPG
Img_6929.jpg

The electronics is mounted at the back side which has a hole at the height of the USB plug. So it is easy to later change the programming without the need to open the box.

The Arduino Code

The sketch can be programmed to feed at certain hours. (once, twice,... per day)
In my programming at 9:00 o'clock and at 21:00 o'clock the motor is turned on for 4 seconds. You can change that easily in code.

The code starts counting the time at 12:00 o'clock. So when you plug in the machine at midday or at midnight the feeding times will be set correctly. To have an exact clock even after a power failure you would need an additional real time clock chip (RTC) and a battery. I think this is not neccessary because pets don't care at which time they eat. In the real life in nature the cats will also not eat a mouse every day exactly at 9:00 o'clock. And the Arduino "clock" will only go wrong after a power failure.

Downloads

The First Attempt Which Did NOT Work

IMG_6933.jpg
IMG_6934b.jpg

It seems self-evident to build a funnel and guide the pellets into the meat grinder.
But this does not work.

Even in a tube of 4 cm diameter the pellets / nuggets will get stuck because they are not smooth and round like peas. My first construction failed because the pellets did not advance.

The Second Attempt Which Works

IMG_6951.jpg
IMG_6952.jpg

Then I cut off the upper part of the attachment which covers the helix.
Cutting the tube with a saw is easy because it is aluminium. Then I inserted it between two blocks of wood in a plywood construction.

Building a Square Box for the Pellets

IMG_6957.jpg
IMG_6958.jpg

With MDF of 5 mm I covered the sides. Paint a circle and cut a hole with the form of an "U" with a jigsaw.

Building a Square Box for the Pellets

IMG_6959.jpg
IMG_6962.jpg

On both sides.

Building a Square Box for the Pellets

IMG_6966.jpg
IMG_6967b.JPG

The box is built around the meat grinder and gets a slide made of a 7,5 cm PVC tube.

Insert the Next Floor

IMG_6968.JPG
IMG_6973.jpg

The next floor is inserted and two MDF boards act as a funnel.

Building a Funnel

IMG_6976.jpg
IMG_6979.jpg

For the sides I recommend to cut first a cardboard with scissors and when it has the correct form transfer the pattern on the MDF wood.

The tank easily takes 20 liters of pellets.

Ready

IMG_6998.jpg

The machine stands in my courtyard under a roof.
If you like the design you can use the "Peeking Cat" in the above ZIP file which I painted on the box.

Water for the Pets

IMG_6999.jpg

I have an automatic water irrigation system for my plants. From that I branch off water for the cats.

If you don't have that you can use the same Arduino to control a water valve (which you can take out of an old washing machine) over a second relay and fill a drinking water tank for your pets. With a water sensor you can measure the water level and when required you open the valve. This can be done with a few lines of additional Arduino code.

Another option is to take the same mechanics which is in the water tank of your toilet. This does not require electronics and is very cheap.