Standard for Your Laptop+Ipad

This standard is inspired by these three standards designs:
http://www.thingiverse.com/thing:21236
http://www.thingiverse.com/thing:22964/#files
http://opendesigncontest.org/node/311/manual

Material: plywood, 3mm
Machine: Universal laser systems, VLS6.60

Licenses: attribution-noncommercial (CC BY-NC)

images of the process

But it was to low, so i have made it a bit higher. 
Because of that became the thing for the ipad to long, so i have made that shorter.
And i have made a hole in the back for your cables.

For making this standard you have to follow these steps:
Step 1: Laser cut your standard

Step 2: Fold it

Step 3: Do the small pieces between the hols in the end of the standard, pay attention to the up and down side of the small pieces (the one with the hole is up)

Step 4: Put on your laptop ore ipad