Staple/ Pencil 2 in 1

by BradyR997 in Workshop > 3D Printing

48 Views, 0 Favorites, 0 Comments

Staple/ Pencil 2 in 1

Screen Shot 2021-05-06 at 8.48.19 AM.png

On the right side of your screen there will be a red box. You will need two of those.

Supplies

Two Red Boxes.

Making the Staple Holder Part

Screen Shot 2021-05-06 at 8.51.20 AM.png

You will take the square and make it these numbers. 30.52 by 67.90.

Line Up the Square Hole

Screen Shot 2021-05-06 at 8.55.28 AM.png

You will need to add up the box with the shadow like this. 58.20 by 15.26

Adding the Pencil Holder

Screen Shot 2021-05-06 at 8.57.59 AM.png

You will now add another box at 29.10 by 109.00.

Adding the Box Shadow

Screen Shot 2021-05-06 at 8.59.59 AM.png

You will put the shadow inside at 16.17. by 100.28

Merging

Screen Shot 2021-05-06 at 9.01.52 AM.png

Grab around both boxes and merge them together when the arrow spot opens.