Star Trek: the Next Generation Communicator Pin

I've always wanted my own communicator so I thought I'd make one myself.

PLEASE NOTE*I could've used higher quality materials than cardboard and glue but I made a lot of mistakes so deal with my mediocre skills*
-glue, I used elmer's
-clear nail polish (optional)also couldn't find it to take that picture
-thick wire not sure about the gauge I used copper because that's what i had lying around
-strong thin cardboard/foamcore
-pin bases and backings
-gold acrylic paint
-bronze acrylic paint
-silver acrylic paint paint

I would've used a printer to get a more exact image but I don't have a printer,I traced an action figure stand and messed with the size a little bit but once you have that,cut it out of cardboard, paint it silver and cover it with clear nail polish if you want.

The base is where the pins attach,they can't fall out. I made 2 but 1 was smaller than the other, poked the backings through (the small one) and glued the part with the pins to the base. but I cut an oval out of the cardboard, I had to make it proportional to the "silver part",painted it with bronze and gold acrylic paint mixed together.
get a couple inches of wire and start making a circle shape straighten it out to make an oval shape so it just sits on top of the perimeter of the oval.

obviously the Silver part goes on top of the gold part. the wire around the base might raise the silver part a little bit so stick a piece of cardboard between the two pieces.and glue everything down really well.

I'm done talking enjoy your communicator.