Steam Powertech Crack Ant

This is a instructable for a steam power tech named: crack ant

Materials are listed below

4 wheels, 1 battery case, 4 white plastic motor cases, 2 black wires, 2 red wires, 13 green nuts, 4 white spinner pieces, 16 regular screws, 6 pointy screws, 2 motors, 6 gears, 1 connector cardboard piece, 2 cardboard pieces, 1 white plastic spiral piece, and 1 cardboard key piece.

Attach the motor on one of the plastic piece

Attach three metal rods for the motor case, then attach three gears. make sure the right gears are attached on the right spot.

Attach the other plastic white motor case on the other side of what we built so far.

Connect the two white plastic spinners onto each side of the motor.

repeat step 2~5 and create another motor

Attach the motor onto the board.
Repeat for the other motor

Attach two wheels onto each side of the motor using screws. Make sure it is stabilised.

Repeat for the other one.

Connect the connector piece on one of them

Connect one to the other one using the connector, and the machine is complete.