Story Box - an Interactive Light Box for Telling Stories

As lights usually only have one function – providing illumination. It will be an interesting idea to give them some playfulness. Story Box is a nightlight box that by putting a story boards in, the light will be turned on and cast shadow on the front. We can also change the light of the box to enhance the storytelling experience.

These are the things we will be using: (If you don't have access to laser cutter, you can hand make the enclosure.)

Laser cut each piece for the box and put them together. Be careful to leave a crack on top and a few holes on the side. Make sure story boards can be put in and potentiometers can be reached from outside. Then, make the front board with a frame and tracing paper.

I also laser cut the story board. You can be creative and hand make it.

The circuit logic is shown in the picture. Understand it before you build it.

Follow the logic flow and build the circuit in the way that fits your enclosure.

Make the switch with your storyboards, so the light will be turned on when you put a storyboard in the crack.

Upload code to Arduino and test it.

[Code]

After put a storyboard in, the shadow will be casted on the front. By turning the potentiometer, you will be able to change the color to match the story. And by turning all three to maximum, the light color will be looped. Enjoy a great story time!