Super Easy Light Up Picture Board

This light up board is all the fun for your kids.

• Cardboard
• Hot glue
• Utility knife
• Marker
• Measuring tape

Cut out the structure with a utility knife I recommend two 4x6 pieces and two 4x4 squares.

Create a rectangular box by hot gluing the pieces together if they do not fit re-draw and cut the shapes.

Next cut out another 4x6 square and then cut out the middle about half an inch in to make a rectangle. DO NOT GLUE IT ON.

Get a plastic bag and hot glue or tape it to one side of the already-made skeleton making a window-looking side.

Draw your image and tape it on the back of the window looking into the box.

cut holes in the sides of the box and put the led strips through the holes.

use paper to tilt up the led strip to a 45-degree angle.

Glue the frame onto the box.

Attach the side of the LED strip with the battery to the top of the box. using tape or glue than put a piece of tape over the other one.

Cut out another piece of cardboard the size of the back and glue it behind the image