How to Make a Super Simple Phone/tablet Stand

by chelseabun in Living > Life Hacks

3181 Views, 17 Favorites, 0 Comments

How to Make a Super Simple Phone/tablet Stand

IMG_20150626_125246.jpg
IMG_20150626_125216.jpg

You are tired of watching a movie but have to hold it with your hand? Your hand get tired when hold your phone/tablet to play game when you laying down? Want to make yourself a super simple phone/tablet stand? I will show you how to make a very good one.

Original Story

Capture.PNG

My mom usually watch video on Youtube with her tablet. She loves to watch video of cooking channel, it mean she have to hold the tablet and writing at the same time. I saw her struggle to place the tablet at a good angle (the tablet has curve at the edge). I bought her a leather cover but it can't stick anymore after a month of work. Then I think I will make a tablet stand for her.

Preparing

IMG_20150626_104035.jpg

This tablet stand is super simple, you only need

Tools required:

  • A knife
  • A hand saw blade (I only need the blade)
  • A metal file
  • A plier (Optional)

Time taken: 10 mins

Grab a safety goggle and put it on to protect your eye from dust.

Processing

IMG_20150626_110224.jpg
IMG_20150626_110446.jpg
IMG_20150626_110853.jpg
IMG_20150626_111117.jpg
IMG_20150626_111351.jpg
IMG_20150626_113154.jpg
IMG_20150626_114417.jpg
IMG_20150626_125419.jpg
  1. First, use the saw blade to cut into the pipe. The depth is just enough to fit the blade (~1.2mm)
  2. Cut the second one. The distance between them is just enough to fit the metal file ( ~1.5cm). This gap is depended on your device.
  3. Then cut the Z shape to remove the excess part (Use the knife to take it out and and use the saw to cut it.
  4. Make another hole with bigger gap (~2cm) in the other end.
  5. After that we have a pipe with "raw cut". Use the metal file and the knife to smooth all the edges
  6. Finally, wash it with water (Yes, wash it).

Enjoy

IMG_20150626_124933.jpg
IMG_20150626_124943.jpg
IMG_20150626_124706.jpg
IMG_20150626_125040.jpg
IMG_20150626_130122.jpg
IMG_20150626_130040.jpg
IMG_20150626_125311.jpg
IMG_20150626_124544.jpg
IMG_20150626_133940.jpg
IMG_20150626_134004.jpg
IMG_20150626_173914.jpg
IMG_20150626_173940.jpg

This tablet stand is so simple yet so strong. It can hold the tablet in both vertical position and horizontal.
The small gap for straight stand and the bigger gap for better view. Put the short end outside will help the device lean further. Remember: do not glue the tea plan with the pipe, let friction do its job because you might want to change between 2 gaps.

Do you know 3 pipes + a tee plan pipe = hold up to 3 devices at a time? Welcome to Gangs of lazy people :v

Since my mom saw 2 more pipes, she said she prefer using 2 pipes for both side rather than 1 with a tee plan. Should yourself, mom .____.