Switches Out of Junk!
Running out of switches? No worries! All you need is a paperclip! Well you need more than a paperclip but it is the main part.
Stuff You Need...
What you need:
A paperclip (stripped/bare/metal)
A paper fastener (2 of them)
Wire(Optional)
AND!
PAPER/CARDBOARD!(A rectangle)
A paperclip (stripped/bare/metal)
A paper fastener (2 of them)
Wire(Optional)
AND!
PAPER/CARDBOARD!(A rectangle)
The Paper Fasteners...
Measure you paperclip then add marks to your paper that length.
Push your fastener in... and split!
When you split, DO NOT LET THE METAL CONTACTS TOUCH!
Push your fastener in... and split!
When you split, DO NOT LET THE METAL CONTACTS TOUCH!
PAPERCLIP!
Hook one end of the paperclip to one of the fasteners.
If You Have the Wire...
Solder or glue or tape the wires on to each fastener.
If your fastener legs are too long, snip it to size.
If your fastener legs are too long, snip it to size.
DONE!
Your done! It was a lot of work, wasn't it? Well now do anything to it!
If you want your fasteners legs to stay still, glue it down to the paper.
If you want your fasteners legs to stay still, glue it down to the paper.