Table to Hold the Herbs

Example for first

A special thanks to Elisa Puntual for inspiration

LINK | Pinterest

Simply obtain the following material & tools:

Materials:

1 table of old wood
14 tacks
7 jars of spices
1 roll of copper wire
2 straight brackets
3 anchors with screws

Tools:

1 screwdriver
1 hand drill
1 cable stripper
1 pliers
1 hammer
1 pencil

Process: 

The screwdriver was used for the distances and the little sign of recognition for the hole to be do subsequently with the drill.

After drilling the holes, hammer nails, making sure that they are positioned at the center, then so be able to insert the copper wire

With stranded copper, wrap well for number 3 or 4 laps the jar available, it is necessary to accurately move the ends of the copper cable to the extreme sides of the hole so to embrace the nail which in this case performs the function of tie.

Work completed

After have applied the double brackets and having procured the plugs and screws, place of valve of wood to the wall in the manner as straight as possible and put a pencil to make holes in the sign for holes with the drill, after piercing the wall plugs and screw the board to the wall.

On completion of work as well if you want to compost for vegetable you could put some small pebbles inside of jars of foam needed only for the bottom, then you can enter the ground with your hands or if you prefer using a small spoon. Now you can pick the planting of herbs you like best ... he then remember to water them thoroughly ;-).

If I'm lucky and the herbs that I planted will grow and survive me, I shall post the final picture with the herbs ;).

Thanks for visiting.

Let's say, the little basil ask for water twice a day, if you leave wither.