Tape Converter

converts sound from a standard headphone jack so that you can play it thgough a tape player

3.5mm headphone jack
magnetic head from old tape player
old tape

Solder the magnetic head to the jack

first remove the inards, then un-screw all the screws on the tape to open it up.
remove all of the parts

cut off the screw holder thingy, that is in the way of the tape head

hot glue in the tape head. the tape head goes in the middle "slot"

feeed the wire3 out the top and then close the tape back up. I reccomend testing it before closing it then your done!

enter longer descriptoin for this step