Tassel Necklace Www.DelanahBanana.com

Delanah Banana

Trying a little DIY today!

Found this adorable necklace idea @ Fall for DIY. (fallfordiy.com)

You will need:

Krazy Glue

Lobster Claps

Jump Rings

Bead Landings

White Parachute Cord

Scissors

Clamps

Thread for Tassels (whichever color you choose)

Spacers

Cut thread into three equal parts.

If you want more tassels then cut as many "parts" as you like.

Tie a piece of the same color thread around the middle of the section.

Add a jump ring to the tied area of the middle.

Use the clamps to secure.

Using some of the same color yarn, tie the area below the jump ring.

Wrap it around numerous times until you have the thickness that you like.

Make 3 piles of 20 jump rings.

Take one pile of jump rings (20) and add them to the parachute cord.

Add a Spacer on each end of the jump rings.

Add a Tassel to one end.

Add another Spacer.

Repeat Steps until you have all three Tassels with jump rings and spacers.

Cut thread so that it's even.

Apply Krazy Glue to a bead landing clasp.

Attach the white parachute cord and hold for a minute.

(Be careful not to get the glue on yourself)

Once your rope is glued, use your clamps to secure the bead landings.

Take a jump ring and attach it to each end.

Add a Lobster Clasp to the jump rings.

YOU'RE DONE!!! ENJOY!!!