Tear-em-off Business Cards

by Printy in Living > Office Supply Hacks

31245 Views, 206 Favorites, 0 Comments

Tear-em-off Business Cards

IMG_7108.JPG
http___makeagif.com_media_8-17-2012_DnAVEB.gif

I like having this on my desk because people see it and go "what is that?" and then play around with it for a while flipping through it - oh who am I kidding... I love flipping through it too!

This makes a great addition to your desk "stuffs". It's also a great paper weight, and super easy to make. So flip through and see how it's done!

Materials

IMG_7090.JPG

You want to grab roughly 50 cards at a time - if you go high like up to 100 it gets flimsy, and if you go less like around 25 it's not as impressive. You're going to want pencils or pens - something that has a flat face on it works better than a round cylinder because it won't dent the cards as much when you clamp them. You'll also want some elastics (I used two really big ones). And of course you'll want some sort of glue - white glue or wood working glue works best.

Stack the Cards

IMG_7091.JPG
IMG_7092.JPG

The first thing you want to do is make sure you've got all the business cards facing the same way, and as neatly stacked as you can get them. Hold tight till the next step!

Strap-it-down Capt'in!

IMG_7095.JPG
IMG_7096.JPG
IMG_7097.JPG
IMG_7098.JPG
IMG_7099.JPG
IMG_7100.JPG

Grab two pencils and make sure your little bundle doesn't adjust itself in your grip while you strap those little guys together. I took the elastic and twisted it between each side which worked pretty well. Grab another set of pencils and do the bottom half as well. Now set it up on the table, ready for the glue.

Add Glue - and Wait

IMG_7102.JPG
IMG_7103.JPG
IMG_7105.JPG
IMG_7106.JPG

This is pretty fun because you get to use so much glue! Basically, you just squeeze the dickens out of the glue bottle till the whole face is covered in glue. You just want to make sure you don't spill on any sides or it will look messy when it's done. So once you've got the glue on there, just spread it around a little bit so that it reaches to the edges, and let it sit.

And when I say let it sit - I actually mean let it sit over night. So make sure it's safe in some place where it's not gonna get bumped.

Remove Clamps - Done!

http___makeagif.com_media_8-17-2012_DnAVEB.gif
IMG_7108.JPG

Once you've waited at least 12 hours (depending on how much glue you put on) the little business card booklet is ready to show off!

Have fun with it! (you could even make a little cartoon stick man drawing on the back of your business cards if you want just to make it more interesting!)