The Ascender Paper Airplane
by deanmackey in Living > Office Supply Hacks
15230 Views, 8 Favorites, 0 Comments
The Ascender Paper Airplane
In the video Robbie the Robot Lamp Demonstrates how to Fly The Ascender!
Here is a nice, simple paper airplane anyone can make.
Here is a link to print off some directions and template
http://www.theonlinepaperairplanemuseum.com/OPAMAscender/OPAM2ASCENDER.doc
Grab some paper and have some fun!
For over 800 FREE paper airplane designs, check out my site at
http://www.theonlinepaperairplanemuseum.com
Step 1
Start with a copy of the plane, a scissors and a roll of clear tape.
Step 2
Fold the top of the paper down to the center line, and give it a good crease.
Step 3
Fold the left corner over to the vertical center line, and crease.
Step 4
Fold the right corner over to the vertical center line, and crease.
Step 5
Fold the top triangle down along the center line.
Step 6
Fold the left side over to and even with the right side.
Step 7
Cut out the "X" areas as shown, and recycle the scraps.
Step 8
Fold the top wing and tail to the left as shown.
Step 9
Flip over and fold the wing and tail to the right on the other side.
Step 10
Tape the nose closed.
Step 11
Pop the wings up a little, and throw it with a slight downwards angle, and watch The Ascender scale to new heights!
_
For Over 800 FREE paper airplane designs, check out my website at
http://www.theonlinepaperairplanemuseum.com
_
For Over 800 FREE paper airplane designs, check out my website at
http://www.theonlinepaperairplanemuseum.com