The Dynamic Photoalbum

Must

Must-haves that you hold two sheets of plywood from 60 am to 30 cm in order to make the cover of the heart, you also need a piece of plexiglass that fits exactly the name on the side of the book to cut out these you need a laser cutter that you use for wood and plexiglass. I have made three illustrator documents for cutting the three files are the one for the cover, the other side of the book and the last for the small piece of plexiglass. To do the LED lights on the side, you need a LED strip, 5V battery, wiring and a switch button that I took out of an flashlight of the action. The last thing needed is the binding glue to paste the page in the book, photo paper, long hinge and screws to attach the hinge and the first letter of your first name and that of your loved one that you should 3d print and then paste in the center.

Should

What else could be a supplement if you certainly want to know that the book holds the leaves, you can make a click system with a 3D printer. When you first print a rectangle with two pins to make sheets with holes in the second to make a cover to keep the leaves together so you can't see the pins and the leaves are tight.

Could

You could also get a photo in front of the cover engraved in the wood toget an even more personal book because it is even more special if you have a photo carved in your book of yourself and your loved one.

Won't

What could possibly recover in the future, I'd make the cover in a different way that it will become a whole piece of wood with the laser cutter so you can cut the wood in a way that it will bend when you have it in your hands.