The E Band - Art Made From Scrap Electronics Parts

Well...

I had some extra resistors (a lot!) and other parts.

So...

I made a piece of art using these circuit scraps.

This step sort of explains itself.

You will need -

• Strip board or perf board
• A lot of electronic components (I just pulled mine off some old circuit boards)
• Hot glue gun and hot glue sticks
• Soldering iron and solder

Use hot glue to hold some parts of your design together

I used resistors and an LED to make a person. I then made 3 more people.

I ran out of solder after the first person, so I just used hot glue.

Put the people and anything remaining onto the board. Pose them like they are playing instruments.

You're done!

Thanks for checking out this project!